ReMote Drop Bar
REMOTE-DRPBAR
Pairs well with
ReMote Drop Bar
ReMote Drop Bar
The ReMote Drop Bar is the new standard dropper lever option for gravel bikes, drop bar mountain bikes, road bikes, and any other bike with drop bars. It is compatible with all cable-actuated dropper posts on bikes that have standard drop bars with an outer diameter of 24mm.
Smooth Actuation, No Play
The ReMote Drop Bar has two stacked 11mm diameter cartridge bearings at the pivot point. Most dropper levers for drop bar bikes use a bushing instead. Having two bearings makes for smooth, predictable actuation. This stacked arrangement of bearings also has a noticeable benefit: when bearings are positioned like this, there is no side-to-side play in the lever.
Smart Ergonomics
The machined clamp is on the opposite side of the assembly from the bearings and lever, which allows the base to be closer to the bars. This creates an assembly with a lower profile and natural ergonomics compared to competitor levers. A clamp opposite of the lever on the assembly also means that the clamp does not interfere with hand placement. A clever pocket was machined into the lever itself. This is where the cable end can be tucked away, hidden from sight and out of reach.
Actuate From Two Sides
The ReMote Drop Bar can be actuated while riding on the hoods or in the drops. A longer lever allows for easy hand access from two angles, while machined ergonomics makes it easier to engage the lever. This means that you can reach your brakes while using your ReMote Drop Bar.
We believe in your right to be able to fix your components. Crashes happen, parts get misplaced, things go bump in the night. All individual pieces of ReMote Drop Bar are available individually as replacement parts, just like other Wolf Tooth components that have multiple pieces.
100% USER SERVICEABLE
Service for the ReMote Drop Bar is easy and can be done at home. Only a 3mm hex key is required to adjust the ReMote Drop Bar, and a T25 allows you to take it apart and rebuild.
REPLACEMENT PARTS AVAILABLE
Each of the 10 components of ReMote Drop Bar can be purchased individually. If something breaks in a crash, save money by replacing just the affected part instead of an entire assembly.
TUTORIAL VIDEOS
A video guide is available to walk you through installation, adjustment, and service. All of this can be done in your home workshop.
ReMote Drop Bar is a new dropper lever option for gravel bikes, drop bar mountain bikes, road bikes, and any other bike with drop bars. It can be actuated while riding on the hoods or in the drops thanks to refined ergonomics and a longer lever for easier access. Two 11mm diameter Enduro bearings are used at the pivot point for smooth actuation. This arrangement of bearings adds durability to the design, eliminates play, and allows for a smaller assembly compared to similar dropper levers. The machined clamp is positioned on the outside of the handlebars, which allows for the base to be closer to the bars, creating an assembly with a lower profile than competitors.
- Compatible with all cable-actuated dropper posts on bikes with drop bars
- Compatible with drop bar bikes that have 1x or 2x in mechanical or electronic shifting
- Complete CNC-machined assembly
- Outboard clamp orientation does not interfere with hand placement
- Cable management pocket keeps cable end tucked away and out of sight
- Replacement parts available
Recommended inline barrel adjuster
An inline barrel adjuster is needed to adjust the tension on the cable. For your convenience, you can purchase it alongside the ReMote Drop Bar on this page. Simply select the Inline Barrel Adjuster option or the Inline Barrel Adjuster and Cable Kit option before adding the ReMote Drop Bar to your cart. All components can also be purchased individually here.
Related Products
Tech Specs
Weight: 37g
Material: 6061 T6 aluminum with stainless steel hardware
Not Included: Cable
and Housing